NEC NP-M402X Portable Conference Room Projector

NEC NP-M402X Portable Conference Room Projector

Review Written By: Marc Davidson | View original article on Projector Central here.

NEC calls the NP-M402X portable, and, indeed, it’s light enough to carry if you need to. It even ships with a soft carrying case. But it’s also heavy enough, at eight pounds, not to mention bulky enough, at 3.5″ x 13.4″ x 10.1″ (HWD), to make it more appropriate for permanent installation or room to room portability on a cart. Built around a 1024×768 DLP chip and rated at 4000 lumens, although it came in a little lower on my tests, it can be a good fit for a mid-size conference room or classroom.

In addition to its brightness, the M402X delivers near-excellent data image quality, an audio system with enough volume for a mid-size room, and a 1.7x zoom lens that helps justify the $959 price. That’s easily enough to make it a potentially attractive choice.

The Viewing Experience

Image quality is a bit of a mixed bag, but the M402X handles data images like word processing and graphics well, which is the single most important issue for a data projector. Like the vast majority of DLP models, it shows occasional rainbow artifacts, in the form of red-green-blue flashes. With video, they showed up often enough, and were obvious enough, that anyone who sees them easily will almost certainly consider them annoying. However, I saw them infrequently enough with data and other static images that few people, if any, are likely to be bothered by them.

Near-excellent data image quality. The M402X scored well for data image quality despite a moderate problem maintaining fine detail. Although black text on white was crisp and readable at sizes as small as 7 points, for example, white text on black lost readability at sizes below 10.5 points. This won’t be a problem with programs like word processors, and it won’t be a problem unless you need to show images with fine detail. But it could be a problem if you need to show complex line drawings with white or other bright lines on a black background.

Very much on the plus side, the M402X did a good job with color balance. It maintained suitably neutral grays at all levels from black to white in every predefined image mode except the brightest, which showed a slight greenish tint in the brightest shades. Given that the brightest modes of most projectors have color balance problems, that’s not really an issue, however. Color quality was also good. Yellow was a little mustard colored in all predefined modes and red was a little dark in the brightest mode, which is typical for DLP projectors. More generally, colors were nicely saturated and vibrant in all modes.

Also on the plus side is that images designed to bring out pixel jitter were as rock solid with an analog (VGA) connection as with a digital (HDMI) connection.

Problematic video quality. With a 1024×768 native resolution, the M402X’s video quality is necessarily limited in crispness and in the detail it can show. Beyond that, I saw unusually obvious, and annoying, judder in clips with the camera panning across the scene, and I saw rainbow artifacts often enough and obviously enough that anyone in your audience who’s sensitive to them will likely find them annoying. All this makes video best limited to short clips with the M402X, if you use video at all.

Setup

Good connectivity. The M402X’s back panel offers a bit more than a typical set of connectors by today’s standards.

  • 2 HDMI
  • 1 VGA IN (for RGB or component)
  • 1 RCA composite
  • 1 USB A (for reading files from USB memory keys or for an $80 optional Wi-Fi dongle.)
  • 1 VGA OUT (monitor loop-through)
  • 1 USB B (for mouse control from the remote plus USB direct display.)
  • 1 LAN (for image and audio data and network control)
  • 1 Stereo mini plug IN (paired with the VGA port by default)
  • 1 RCA stereo IN
  • 1 Microphone mini plug IN
  • 1 Stereo mini plug OUT
  • 1 RS-232 (for external control)
  • 1 VESA 3D RF sync

Setting up. Setting up the M402X is easy, with the 1.7x zoom giving you a lot more flexibility than most models offer for how far you can put the projector from the screen for a given size image. For most of my tests at the native 4:3 aspect ratio, I used a 98-inch diagonal image with maximum zoom (full widescreen) and the projector 117″ from the screen.

Both the zoom and focus rings offer smooth control. However, the focus changes a lot with very little movement, so even though it’s not hard to get crisp focus over the entire screen, it’s a little harder than it should be to get it just right.

With the projector sitting on a table, the vertical offset puts the bottom of the image roughly 15% of the screen height above the midline of the lens. If you need to, you can move the image up with a drop-down foot on the front of the projector. In a nice touch, the foot also includes a screw adjustment for fine control. You can also move the image down by adjusting the screw-on feet at the back. As a finishing touch, you can adjust image shape if necessary. The menus offer both horizontal and vertical digital keystone controls and a choice of setting the feature to automatic or adjusting both settings manually.

Key Features

Potentially long lamp life. NEC rates the lamp life for the M402X at 3500 hours in the Normal setting for Eco mode and 8000 hours for the Eco setting. There’s also an Off setting, which is brighter than either Normal or Eco, and which presumably results in a shorter life, although NEC doesn’t provide a rating for the Off setting. In any case, with a $299 replacement cost for the lamp, taking advantage of one of the Eco modes can significantly lower the total cost of ownership.

Capable audio. The 20-watt mono speaker delivers good enough audio quality to be useful plus enough volume to fill a mid-size room. If you need better quality, stereo, or still more volume, you can plug an external audio system into the audio output.

Test Results


Bright image with wide brightness range. The M402X came in at a solid 91 percent of its 4000-lumen rating in my tests, at 3626 lumens in with its brightest predefined setting and with Eco mode set to Off. As a point of reference, following SMPTE (Society of Motion Picture and Television Engineers) recommendations, that’s bright enough for a 260″ diagonal image with a 1.0 gain screen in theater dark lighting. It’s also easily bright enough for the 98″ image I used for most of my tests to stand up to moderate ambient light.

For smaller screen sizes or lower light levels, you can switch to one of the Eco modes, choose any of six other predefined modes, or both. Normal mode dropped the brightness by about 20%, to 2868 lumens with the brightest predefined setting. Eco mode dropped it by about 55%, to 1990 lumens. With Eco mode off, the six other predefined settings came in at 972 to 2602 lumens.

Keep in mind too that as with most DLP projectors, the actual brightness is more complicated than with LCD models, because the color brightness is lower than the white brightness. This can make color images less bright than you would expect from just knowing the white brightness, and can also affect color quality. As is typical, the difference between the two for the M402X is most significant for the brightest predefined mode, which explains why red looks a little dark in that mode.

Good, but not great, brightness uniformity. Brightness uniformity across the screen came in at 71%. That’s low enough so I could see the difference between the brightest and darkest areas on a solid white or color screen. However the change was gradual enough across the screen to make it almost impossible to see a difference with the screen broken up by text or graphics.

Limitations

3D. For most people, 3D isn’t much of a factor for a 1024×768 data projector. To the extent that it matters, however, note that the M402X can work with a video source like a Blu-ray player or game console to show 3D images over an HDMI connection. Unlike most recent projectors, however, the M402X doesn’t automatically switch to 3D mode. You have to turn it on each time and then turn it off again manually to regain control over some settings on the menu. This can quickly get tiresome, with more than ten button presses needed for turning it on and off each time.

No MHL support. Although you can show images from an MHL-enabled phone or tablet using one of the M402X’s HDMI ports, the projector itself lacks MHL support. That means you need a special cable that can connect to a power source as well as the mobile device and the projector.

Conclusion

The NP-M402X is the wrong choice if you need to show much video. However, it also offers a lot to like otherwise, starting with its near-excellent data image quality. Beyond that, it’s easily bright enough, and the sound system is loud enough, for a mid-size room; the 1.7x zoom lens helps makes setup easy; and it offers lots of flexibility for image sources from PC-free presentations with a USB memory key to sending presentations over a network. If 1024×768 is the resolution you need, the NP-M402X offers more than enough to be worth considering.

____________________________________________________________________________

Ready to begin shopping for your projector? You can view the NP-M402X on our site here. You can also browse a variety of other projectors available from Projector SuperStore here. Don’t see the one you’re looking for, or have other questions? Give us a call at 888-525-6696 and one of our sales team members will be happy to assist you! 

____________________________________________________________________________

About NEC- NEC Display Solutions designs, produces and delivers leading-edge visual display technology for a wide variety of markets. We specialize in desktop and large-screen LCD displays, and a diverse line of projectors for customers who demand the most high-quality, reliable display solutions to meet their needs. You can learn more about NEC on their website here.

About Projector SuperStore - For over 20 years, Projector SuperStore has been the premier source for affordable Audio and Visual equipment online. We have worked with hundreds of businesses across the nation and have the expertise to help you integrate the right technology for your specific needs and bring your message to the masses. Whether you’re looking for a projector for a meeting room, a portable system for use in multi-purpose rooms, a state-of-the-art projection system for your main auditorium, the latest home theater technology or anything in between, we can help you create a system that is right for your needs and fits within your budget. View more information on our website here.

, , , , , , , , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Current month ye@r day *